samsung galaxy j3 emerge how to view files on mac

First time boot is take long time about 5-10 min.Before we get started with manual download, you should check to see if the update has already been sent to your device over-the-air.

Now the device should be rebooted and it is safe to remove/unplug your device.

When the flashing process is done and if everything goes well, you should see a big green box saying PASS!.

After adding the file, click Start to begin the flashing process (DO NOT REMOVE OR OPERATE ON YOUR DEVICE UNTIL FINISHED).

Do NOT tick any extra boxes!! and add the 1 file Samsung firmware to AP/PDA or 4 files Samsung firmware (AP/BL/CP/CSC) to it's slots.

At the lower-left of Odin interface, it should show a light-blue box at the ID:COM.

You device should be automatically recognized by Odin.

Warning will show up before entering into Download Mode, press Volume Up key to enter Download mode, which has a green robot figure and Downloading… Do not turn off target!!.Hold Home + Power + Volume Down buttons or hold Volume Down + Bixby buttons.

Turn off your device, then enter Download Mode.

Then extract the Firmware Samsung Galaxy J3 Emerge SM-J327P that you have downloaded.

For more details, you can read and follow the following guidelines: How to Flashing Samsung Galaxy J3 Emerge SM-J327PĪll types of Samsung device can be flashed this way. Make sure You download all required files, if done let's to do this.

Firmware Samsung Galaxy J3 Emerge SM-J327P.

Additional Files or Software: Before Flash Samsung Galaxy J3 Emerge SM-J327P make sure the battery is at least 60% charged and you have to prepare the following materials:

Samsung galaxy j3 emerge how to view files on mac